Page 35 - Electronics Starter Kit_EN
P. 35

Lesson 8: Toggle Switch with Transistors


               8.1 Overview

               In this lesson we are coint to make a toggle switch using push button and transistors.


               8.2 Components Required

               1 x Breadboard Power Supply
               1 x 9V Battery
               1 x 9V Battery Connector
               1 x Breadboard 830p
               1 x push Button
               1 x 2N2907 PNP Transistor
               2 x 2N2222 NPN Transistor
               1 x 5mm red LED
               1 x 220 Ω resistor
               2 x 100 KΩ resistor
               1 x 10 KΩ resistor
               2 x 1 MΩ resistor
               1 x 100 nF Capacitor
               10 x M-M wires (Male to Male jumper wires)

               8.3 Circuit


               Schematic







































                                                             34

               Electronics Starter Kit r.00                                                 www.plusivo.com
   30   31   32   33   34   35   36   37   38   39   40